OBR12M-R103-2EP-IO-L - Cảm biến quang điện - Đại lý Pepperl fuchs - Cơ hội giao thương tại Hà Nội

Đóng

Quay lại

Bấm vào đây để quay lại

Tin đã lưu

Chưa có tin đánh dấu nào

Cơ hội giao thương

Tin sau

06/06/230

Lưu tin

Địa chỉ: Hà Nội

SMS
Chat hỏi chủ tin
0965130856

Thông tin thêm

OBR12M-R103-2EP-IO-L - Cảm biến quang điện - Đại lý Pepperl fuchs

Nhà sản xuất: Pepperl Fuchs

Nhà cung cấp: Newskyvn

Model : OBR12M-R103-2EP-IO-L

Tên sản phẩm: Cảm biến quang điện

Liên hệ để được tư vấn hỗ trợ Mr.Thanh:

Email: quangthanh@newskyvn.com

Zalo: 0965.130.856

Đại lý Pepperl Fuchs Việt Nam

Bảng thông số kỹ thuật của cảm biến OBR12M-R103-2EP-IO-L

Pepperl Fuchs

Product Description
Laser retroreflective sensor

General specifications
Effective detection range		0 ... 12 m
Reflector distance		0.25 ... 12 m
Threshold detection range		15 m
Reference target		H50 reflector
Light source		laser diode
Light type		modulated visible red light
Polarization filter		yes
Laser nominal ratings
	Note	LASER LIGHT , DO NOT STARE INTO BEAM
	Laser class	1
	Wave length	680 nm
	Beam divergence	> 5 mrad d63 < 2 mm in the range of 250 mm ... 750 mm
	Pulse length	1.6 µs
	Repetition rate	max. 17.6 kHz
	max. pulse energy	9.6 nJ
Diameter of the light spot		approx. 30 mm at a distance of 12 m
Angle of divergence		approx. 0.3 °
Ambient light limit		EN 60947-5-2
Functional safety related parameters
MTTF_d		672 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Indicators/operating means
Operation indicator		LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode
Function indicator		Yellow LED: Permanently lit - light path clear Permanently off - object detected Flashing (4 Hz) - insufficient operating reserve
Control elements		Light-on/dark-on changeover switch
Control elements		sensitivity adjustment
Parameterization indicator		IO link communication: green LED goes out briefly (1 Hz)
Electrical specifications
Operating voltage		10 ... 30 V DC
Ripple		max. 10 %
No-load supply current		< 20 mA at 24 V supply voltage
Protection class		III
Interface
Interface type		IO-Link ( via C/Q = pin 4 )
Transfer rate		COM 2 (38.4 kBaud)
IO-Link Revision		1.1
Min. cycle time		2.3 ms
Process data width		Process data input 2 Bit Process data output 2 Bit
SIO mode support		yes
Device ID		0x110205 (1114629)
Compatible master port type		A
Output
Switching type		The switching type of the sensor is adjustable. The default setting is: C/Q - BK: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link /Q - WH: NPN normally closed / light-on, PNP normally open / dark-on
Signal output		2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Switching voltage		max. 30 V DC
Switching current		max. 100 mA , resistive load
Usage category		DC-12 and DC-13
Voltage drop		≤ 1.5 V DC
Switching frequency		2000 Hz
Response time		250 µs
Conformity
Communication interface		IEC 61131-9
Product standard		EN 60947-5-2
Laser safety		EN 60825-1:2014
Approvals and certificates
UL approval		E87056 , cULus Listed , class 2 power supply , type rating 1
FDA approval		IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Ambient conditions
Ambient temperature		-40 ... 60 °C (-40 ... 140 °F) , fixed cable -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
Storage temperature		-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Housing width		15 mm
Housing height		36.5 mm
Housing depth		26.7 mm
Degree of protection		IP67 / IP69 / IP69K
Connection		2 m fixed cable
Material
	Housing	PC (Polycarbonate)
	Optical face	PMMA
Mass		approx. 38 g
Cable length		2 m