IFM Vietnam. Tổng kho Sensor IFM. Tổng phân phối
27/11/150
Lưu tin
Địa chỉ: Hà Nội
Thông tin thêm
ANS Việt Nam là công ty XNK hàng đầu và là nhà cung cấp chuyên nghiệp các mặt hàng “Máy móc và các thiết bị IFM vietnam nên chúng tôi có thể cung cấp dịch vụ chất lượng nhất với giá tốt nhất cho khách hàng của mình.
Quý khách có nhu cầu về tất cả các thiết bị hãng IFM vietnam xin vui lòng liên hệ:
==================================
Ms.Chung (Sales Dept)
ĐT:01249994129
Email: chung.ans@ansvietnam.com
=====================================
Online contact
Yahoo: chungnguyenans
Skype:chungnguyenans
Đặc biệt: - Tư vấn hỗ trợ kỹ thuật cho khách hàng.
- Hàng chính hãng có đầy đủ CO/CQ.
- Giao hàng miễn phí tại kho bên mua.
Chúng tôi cung cấp tất cả sản phẩm của hãng này , nếu không tìm được mã của thiết bị Vui lòng gọi 01249994129, gặp Ms.Chung để biết thêm thông tin của thiết bị và được hỗ trợ kỹ thuật tốt nhất
Inductive sensors | |||
 | Inductive sensors are nowadays indispensable for industrial usage. As compared to mechanical switches they offer almost ideal conditions: non-contact operation free from any wear and tear, high switching frequencies and accuracy. In addition, they are insensitive to vibration, dust and moisture. Inductive sensors detect all metals without contact.
| ||
Capacitive sensors | |||
 | Capacitive sensors are used for the non-contact detection of any objects. In contrast to inductive sensors, which only detect metallic objects, capacitive sensors can also detect non-metallic materials. Typical applications are in the wood, paper, glass, plastic, food and chemical industries.
| ||
Magnetic sensors | |||
 | Magnetic sensors are used for the detection of positions without contact or wear and tear in control technology. They are used where inductive proximity switches reach their limits. Since magnetic fields penetrate all non-magnetisable materials, the sensors can detect magnets through walls made of non-ferrous metal, stainless steel, aluminium, plastic or wood.
| ||
Cylinder sensors | |||
 | Non-contact sensors virtually work without wear and often achieve a longer life than Reed switches. This saves expensive repair and downtimes.
| ||
Photoelectric sensors for general applications | |||
 | Photoelectric sensors are used where safe and non-contact de-tection of the exact position of objects is required. The material of the objects to be detected is of no importance. Compared to proximity switches photoelectric sensors have a much higher sensing zone.
| ||
Photoelectric fork sensors / angle sensors | |||
 | As is the case with through-beam sensors transmitter and receiver are arranged face to face. Both components are permanent parts of a fork or an angle, i.e. they do not have to be aligned towards each other. If an object enters the detection zone, the light beam is interrupted and a switching signal is generated. Optical fork and angle sensors use a particularly fine light beam and are thus suitable for the detection of tiny objects.
| ||
Laser sensors / distance measurement sensors | |||
 | Laser systems are used where detection of small objects or precise positioning is required. Due to the small angle of divergence long ranges of up to 60 metres can be achieved.
| ||
Fibre optic sensors | |||
 | Fibre optics are used where mounting space for photoelectric standard sensors is confined. Advantages of these systems: The evaluation electronics and the optoelectronic components are located separately from the sensing surface of the system. Fibre optic sensing heads can therefore be mounted in places where access is difficult.
| ||
Photoelectric sensors for specific applications | |||
 | Special tasks require special solutions. In addition to the standard photoelectric sensors and fibre optic systems ifm electronic offers special sensors for certain applications.
| ||
Feedback systems for valves and valve actuators | |||
 | ifm electronic offers two inductive sensors integrated into one housing for position feedback on quarter-turn actuators (type IND). A target puck with two targets offset by 90° which is installed on the actuator shaft damps the lower or upper sensor of the IND depending on the position of the actuator ("open" or "closed). For position feedback on rising stem valves efector valvis is used. Two or three optional switch points can be set via a pushbutton over a stroke of 80 mm. This measuring stroke is resolved into steps of 0.2 mm by means of a target mounted on the valve spindle. Using this inductive sensor enables the detection of even very short strokes.
| ||
Switching amplifiers | ||
 | Switching amplifiers evaluate the sensor''s signal and control the output. Variants with relay as well as active transistor and potential-free optocoupler outputs are available.
| |
- Mã tin: 25506473
Tăng lượt xem cho tin
* Giá chỉ từ 15.000đ
Chia sẻ tin đăng này cho bạn bè:
Hướng dẫn giao dịch an toàn
- Không thanh toán tiền trước khi nhận hàng
- Kiểm tra hàng cẩn thận trước khi mua
- Giao dịch ở nơi công cộng
Tin rao vặt liên quan
4
Quạt sấy lúa hướng trục kiểu mới
30/04 7Hà Nội
5
Máy sấy lúa 2 tấn/mẻ hộ gia đình
30/04 8Hà Nội
1
Bán máy ép gạch bông gió , lam gió.
30/04 12Hà Nội
4
Bán máy sấy lúa hiện đại từ 5 tạ đến 1 tấn,2 tấn
30/04 13Hà Nội
1
Tấm tản nhiệt pvc
29/04 1Hà Nội
1
Tời điện kio gg200 tải trọng nâng 200kg cáp 30m điện 220v
27/04 49Hà Nội
10
Máy mài sàn bê tông công nghiệp sơn epoxy
27/04 7Hà Nội
20
Xe lu rung mini dắt tay hàng nhật bãi 600kg 1 tấn
27/04 7Hà Nội
