CMCP7504 Four Channel Machinery Monitoring System-STI Vietnam-TMP Vietnam
10/01/1820
Giá: 60.000đ
Địa chỉ: TP HCM
Thông tin thêm
Công ty Tăng Minh Phát Việt Nam là Nhà phân phối của hãng STI tại Việt Nam. Chúng tôi chuyên cung cấp CMCP786A-I General Purpose, Top Exit chính hãng STI giá cạnh tranh:
Liên hệ cho chúng tôi theo số: 0907 300 847 – 0917 543 068 để được hỗ trợ và tư vấn.
Email : long.tmpvietnam@gmail.com
sale02@tmpvietnam.com
Skype: long.tmpvietnam
Website: www.tmpequipment.com
- 100mV/g ±10%
- Integral Stainless Steel Overbraided Cable
- 1.5Hz to 12kHz (90 to 720k cpm)
- 2 Second Setting Time
- -67 to +284° F (-55 to 140° C)
- 1/4" x 28 UNF Mounting Stud
- Class I Division II Approved
- Lifetime Warranty
Features:
Sensitivity: 100mV/g ±10%
Mounting: 1/4"-28 UNF Male (Adapters Available)
Frequency Response (±3dB): 0.8Hz to 15kHz (48 to 900k CPM)
Dyanamic Range: ±80 g, peak
Setting Time: 2 Seconds
Power Requirements: 18-30 VDC
Temperature Range: -67 to 284°F (-55 to 140°C)
Case Material: 316L Stainless Steel
Connection: Stainless Steel Overbraided ETFE Cable
Approvals: CSA/UL Class I Division II Approved, Groups B, C,D
Warranty: Lifetime Quality Warranty
Chúng tôi cung cấp đầy đủ thiết bị từ hãng STI:
CMCP785A General Purpose, Side Exit | 100mV/g ±10% 2 Pin MS Connector, Side Exit 1.5Hz to 12kHz (90 to 720k cpm) 2 Second Setting Time -67 to +284° F (-55 to 140° C) 1/4" x 28 UNF Captive Bolt Class I Division II Approved Lifetime Warranty |
CMCP786A General Purpose, Top Exit | 100mV/g ±10% 2 Pin MS Connector, Top Exit 1.5Hz to 12kHz (90 to 720k cpm) 2 Second Setting Time -67 to +284° F (-55 to 140° C) 1/4" x 28 UNF Mounting Stud Class I Division II Approved Lifetime Warranty |
CMCP787A Premium, Side Exit | 100mV/g ±10% 2 Pin MS Connector, Top Exit 1.5Hz to 12kHz (90 to 720k cpm) 1 Second Setting Time -67 to +284° F (-55 to 140° C) 1/4" x 28 UNF Captive Bolt Class I Division II Approved Lifetime Warranty |
CMCP788A Premium, Top Exit | 100mV/g ±5% 2 Pin MS Connector, Top Exit 1.5Hz to 12kHz (90 to 720k cpm) 1 Second Setting Time -67 to +284° F (-55 to 140° C) 1/4" x 28 UNF Mounting Stud Class I Division II Approved Lifetime Warranty |
Integral Cable |
|
CMCP1100 Low Cost Accelerometer | Low Cost 100mV/g ±10% 0.32 Hz to 10 kHz (19.2 to 600k cpm) -65 to +185°F (-54 to 85°C) Top Exit Integral Cable 1/4"x28 UNF Mounting Stud 1.5 Second Settling Time 0.5" Diameter |
CMCP1100HT High Temp Accelerometer | High Temperature Small 1/2" Footprint Top Exit 100 mv/g 10% 0.32 Hz to 10 kHz -65 to +250° Deg. F -54 to 121 Deg. C Integral Cable 1/4" x 28 UNF Stud |
CMCP1100S Low Cost Accelerometer | General Purpose Small 1/2" Footprint Side Exit 100 mV/g 10% 0.32 Hz to 10 kHz -65 to 185 Deg. F -54 to 85 Deg. C Integral Cable 1/4"x28 UNF Stud |
CMCP785A-I General Purpose, Side Exit | 100mV/g ±10% 2 Pin MS Connector, Top Exit 1.5Hz to 12kHz (90 to 720k cpm) 2 Second Setting Time -67 to +284° F (-55 to 140° C) 1/4" x 28 UNF Captive Bolt Class I Division II Approved Lifetime Warranty |
CMCP786A-I General Purpose, Top Exit | 100mV/g ±10% Integral Stainless Steel Overbraided Cable 1.5Hz to 12kHz (90 to 720k cpm) 2 Second Setting Time -67 to +284° F (-55 to 140° C) 1/4" x 28 UNF Mounting Stud Class I Division II Approved Lifetime Warranty |
CMCP787A-I Premium, Side Exit | 100mV/g ±5% 2 Pin MS Connector, Side Exit 1.5Hz to 12kHz (90 to 720k cpm) 1 Second Setting Time -67 to +284° F (-55 to 140° C) 1/4" x 28 UNF Captive Bolt Class I Division II Approved Lifetime Warranty |
CMCP788A-I Premium, Top Exit | 100mV/g ±10% Integral Stainless Steel Overbraided Cable 1.5Hz to 12kHz (90 to 720k cpm) 1 Second Setting Time -67 to +284° F (-55 to 140° C) 1/4" x 28 UNF Mounting Stud Class I Division II Approved Lifetime Warranty |
Compact |
|
CMCP1100C Compact, M8 Connector | 100mV/g ±10% 3 Pin M8, Top Exit 0.32Hz to 10kHz (19.2 to 600k cpm) 2.5 Second Setting Time -65 to +185° F (-54 to 85° C) 1/4" x 28 UNF Mounting Stud |
CMCP770A Compact, Top Exit | 100mV/g ±10% 2 Pin MS Connector, Top Exit 0.8Hz to 19kHz (48 to 1,140k cpm) 1 Second Setting Time -67 to +266° F (-55 to 130° C) 1/4" x 28 UNF Mounting Stud Class I Division II Approved Lifetime Warranty |
CMCP780A Compact, Side Exit | 100mV/g ±10% 2 Pin MS Connector, Side Exit 0.8Hz to 19kHz (48 to 1,140k cpm) 1 Second Setting Time -67 to +266° F (-55 to 130° C) 1/4" x 28 UNF Captive Bolt Class I Division II Approved Lifetime Warranty |
Dual Output |
|
CMCP785T Dual Output, Side Exit | 100mV/g ±10% 10mV/°C Temperature Output 3 Pin MS Connector, Top Exit 1.5Hz to 12kHz (90 to 720k cpm) 2 Second Setting Time -67 to +284° F (-55 to 140° C) 1/4" x 28 UNF Captive Bolt Class I Division II Approved Lifetime Warranty |
CMCP786T Dual Output, Top Exit | 100mV/g ±10% 10mV/°C Temperature Output 2 Pin MS Connector, Top Exit 1.5Hz to 12kHz (90 to 720k cpm) 2 Second Setting Time -67 to +284° F (-55 to 140° C) 1/4" x 28 UNF Mounting Stud Class I Division II Approved Lifetime Warranty |
Biaxial/Triaxial |
|
CMCP1300A Triaxial Accelerometer | Low Cost 100mV/g ±10% 4 Pin MS Connector 0.32Hz to 10kHz (19.2 to 600k CPM) 2 Second Settling Time 1/4"-28 UNF Captive Bolt Lightweight Aluminum Case |
CMCP760T Triaxial, Side Exit |
100mV/g ±10% 4 Pin M12, Side Exit 1.5Hz to 12kHz (90 to 720k cpm) 2 Second Setting Time -67 to +284° F (-55 to 140° C) 1/4" x 28 UNF Mounting Stud Lifetime Warranty |
Piezo Velocity |
|
CMCP793V Top Exit Velocity Transducer | 100 mV/In/Sec ±10% 2 Pin MS Connector, Top Exit 2 to 8kHz Frequency Response 2 Second Settling Time -67 to +284° F (-55 to 140° C) 1/4" x 28 UNF Mounting Stud Class I Division II Approved |
CMCP793V-500 Piezo-Velocity, Top Exit |
500 mV/In/Sec ±10% 2 Pin MS Connector, Top Exit 2 to 8kHz Frequency Response 2 Second Settling Time -67 to +284° F (-55 to 140° C) 1/4" x 28 UNF Mounting Stud Class I Division II Approved |
CMCP797V Piezo Velocity, Side Exit | 100 mV/In/Sec ±10% 2 Pin MS Connector, Side Exit 2 to 8kHz Frequency Response 2 Second Settling Time -67 to +284° F (-55 to 140° C) 1/4" x 28 UNF Captive Bolt Class I Division II Approved |
CMCP797V-500 Piezo-Velocity, Side Exit |
500 mV/In/Sec ±10% 2 Pin MS Connector, Side Exit 2 to 8kHz Frequency Response 2 Second Settling Time -67 to +284° F (-55 to 140° C) 1/4" x 28 UNF Captive Bolt Class I Division II Approved |
4-20 mA Sensors (accelerometer and transmitter combined into one housing) |
|
CMCP420VT Loop-Powered Vibration Transmitter | Integral Sensor 4-20 mA Output Dynamic Signal Output UL and CSA Approved Class 1, Division 2, Group B-D CE Approved RoHS Compliant |
CMCP420VT-T Dual Parameter Loop-Powered Vibration and Temperature Transmitter | Dual Parameter (Vibration and Temperature) Solid State Reliability 2-Wire Loop Powered (4-20 mA) 3/4" NPT for Conduit Connections Industry Standard 1/4"x 28 UNF Stud Mounting Optional Display UL and CSA Approved Class 1, Division 2, Group B-D CE Approved RoHS Compliant |
CMCP422VT Series Loop Powered Velocity Transmitter (4-20mA) | Low Cost Vibration Velocity RMS or Peak Detection Top Exit 2 Pin Mil-Spec 5015 Connector Optional 5 Meter Armored Integral Cable Rugged Design Loop Powered 4-20 mA Interfaces Directly to PLC/DCS Systems Two Ranges Available Operating Temperature Range: -13 to +194 degrees F (-25 to 90 degrees C) 1/4" x 28 UNF Mounting Stud Optional Armored Integral Cable |
CMCP422VTS Series Loop Powered Side Exit Velocity Transmitter (4-20mA) | Low Cost Vibration Velocity RMS or Peak Detection Side Exit 2 Pin Mil-Spec 5015 Connector 3 Connector Options Rugged Design Loop Powered 4-20 mA Interfaces Directly to PLC/DCS Systems Two Ranges Available Operating Temperature Range: -13 to +194 degrees F (-25 to 90 degrees C) 1/4" x 28 UNF Mounting Stud Optional Armored Integral Cable |
CMCP422AT Series Loop Powered Acceleration Transmitter (4-20mA) | Low Cost Vibration Acceleration RMS or Peak Detection Top Exit 2 Pin Mil-Spec 5015 Connector Optional 5 Meter Armored Integral Cable Rugged Design Loop Powered 4-20 mA Interfaces Directly to PLC/DCS Systems Two Ranges Available Operating Temperature Range: -13 to + 194 degrees F (-25 to 90 degrees C) 1/4" x 28 UNF Mounting Stud |
CMCP422ATS Series Loop Powered Side Exit Acceleration Transmitter (4-20mA) | Low Cost Vibration Acceleration RMS or Peak Detection Top Exit 2 Pin Mil-Spec 5015 Connector Optional 5 Meter Armored Integral Cable Rugged Design Loop Powered 4-20 mA Interfaces Directly to PLC/DCS Systems Two Ranges Available Operating Temperature Range: -13 to +194 degrees F (-25 to 90 degrees C) 1/4" x 28 UNF Mounting Stud |
CMCP423VTA Compact Vibration Switch | Low Cost, Compact Vibration Switch 4-20mA and Relay Output Vibration Velocity RMS 1.0 or 2.0 Ranges (25.4 or 50.8mm/sec) 10 to 1kHz Frequency Response Adjustable Alarm Level (0-100% Full Scale) Adjustable Time Delay (0-60 Seconds) Locking Adjustments 4 Pin Eurofast Connector IP67 Rated |
CMCP420XPHD Explosion Proof Head for CMCP420VT |
Explosion Proof Head for CMCP420VT Loop Powered Transmitter. The CMCP420VT Transmitter equipped with the CMCP420XP Explosion Proof Head will make it rated for Class I Division I areas. |
CMCP420BNC BNC Adapter for CMCP420VT | 90 Degree 3/4” NPT conduit elbow with a BNC connector to access the raw acceleration signal. This is useful for connection to portable data collectors. |
CMCP420EL 90 Degree 3/4" x 3/4" NPT Elbow for CMCP420VT |
Accessory for the CMCP420VT Series Vibration Transmitters Useful for connecting CMCP420VT to hard or flexible conduit. When used with the CMCP420-WF, provides a simple weatherproof exit for the instrument wire. |
CMCP420LED/LCD Display | The display for the CMCP420VT is loop powered display that shows the actual vibration levels in velocity on an easy to read LCD or LED display. The display also includes a BNC connector that provides access to the raw acceleration signal. This is useful for connection to portable data collectors. The temperature readout is designed for use with the CMCP420VT-T Dual Parameter Vibration and Temperature Transmitter. The temperature display does not include a BNC output. |
CMCP420WF 3/4" NPT Weatherproof Cable Fitting for CMCP420VT |
The CMCP420WF Waterproof Cable Fitting when used with the CMCP420LED, CMCP420BNC or CMCP420EL provides a waterproof instrument wire exit. |
- Mã tin: 28128556
Tăng lượt xem cho tin
* Giá chỉ từ 15.000đ
Hướng dẫn giao dịch an toàn
- Không thanh toán tiền trước khi nhận hàng
- Kiểm tra hàng cẩn thận trước khi mua
- Giao dịch ở nơi công cộng